0097126282401
00971502045610
ARKON FLOW SYSTEMS
ELECTROMAGNETIC FLOW METERS
MAGB1
BATTERY POWERED ELECTROMAGNETIC FLOWMETER
Now is possible to install a reliable flowmeter virtually anywhere without sacrificing accuracy or performance. No main power required. Adviced to applications such as irrigation or any other applications where is difficult or expensive to take the power lines
MAG X2
THE NEW ARKON'S MODULAR DESIGN OF ELECTROMAGNETIC FLOWMETER
Based on the same modular design as MAGX1 keeping all its advantages MAGX2 allows to the user to „design“ his own flowmeter for each application, selecting exactly the modules required and saving the cost of having not required features. It also allows easy updates.
MAGS1
The ultimate power quality tool
from 120 volts to 40kV
Determine frequency, power, harmonics,
sags & swells, transients, and inrush
Maintain power systems
and troubleshoot power problems
Download Waveforms to a scope or analyzer
AGRIMAG
AGRIMAG is a user friendly low cost flowmeter. It is one piece build in polypropylene powered by (6) AA batteries. It is available in 1”, 2” and 3” sizes. It has an accuracy of 1% and a battey life of 1-3 years
AGRIMAGP
AGRIMAGP is a user friendly low cost flowmeter with power supply and one fequency output. It is one piece build in polypropylene. It is available in 1”, 2” and 3” sizes. It has an accuracy of 1%.
MAGX2 Modules
MAGX2 offers a wide range of modules to allow each customer to design their own solution for his application. The modules are plug and play, can be easily installed or removed from the mother board (always check first that the unit is powered off) and have in most of the cases the size of a big post stamp.
VeriMAG1
VeriMAG1 is a stand-alone smart field testing instrument, which can detect any irregularity of its measurement status and confirm its accuracy within spectrum of +-1% without interrupting the flowmeter installation.
Ultrasonic Flowmeters
MQU- Ultrasonic Flowmeters
MAGX2 offers a wide range of modules to allow each customer to design their own solution for his application. The modules are plug and play, can be easily installed or removed from the mother board (always check first that the unit is powered off) and have in most of the cases the size of a big post stamp.
MHU Ultrasonic Level Meter
The Arkon ultrasonic flowmeter combined with a flume is suitable for open channel measurements. The meter has a measurement range up to 4m. It includes LCD display, communication RS232 or RS485, current output 4-20mA, pulse, 4 relays and a built in data-logger. MODBUS RTU communication as an option.
Parshall Flumes
Parshall Flumes
Arkon Parshall Flumes are primary flow devices with a wide range of applications, for measuring open channel flow. They can be used for flow measurement in creeks, irrigation and/or drainage channels, sewer outfalls, waste water treatment plants, etc. Arkon parshall flumes are made of polypropylene and are resistant to air temperatures up to 80°C (however, water inside the flume must not get frozen). Moreover, Arkon parshall flumes can stand up well the solutions of inorganic salts, acids and bases that do not exhibit strong oxidation properties, and a majority of organic solvents. Maximum size of suspended solids is limited to 80% of the throat width (dmax = 0.8 w). Arkon Flow Systems also provides checking of your hydraulic projects of parshall flumes for free and hydraulic calculation of parshall flumes installations.
​
Advantages:
The main advantages of Arkon Parshall flumes can be summarized as follows:
A relatively low energy loss (3–4 times lower than in sharp-crested weirs).
A small sensitivity to a velocity distribution in an approach channel.
Flow rate measurement even under drowned conditions.
Velocities inside a Parshall flume are high enough to prevent it from the deposition of sediments or accumulation of debris.
Minimum maintenance requirements.
A wide range of flow rates.
A long lifetime.
